通知

通知：

祝賀奧松機器人成為美國Adafruit中國區域代理商，美國Adafruit官方對奧松機器人企業資質、行業地位、業務能力、技術條件以及售后服務等多方面經過數月考核，通過認證，并授予奧松機器人（ALSRobotBase）成為美國Adafruit官方授權的中國大陸地區代理經銷商。購買Adafruit原裝正版產品請認準官方授權！

產品介紹：

The Printrbot Simple is an exercise in 3D printing minimalism. It includes only what is needed to get started in the world of 3D printing. After building this kit you'll have a fully-functioning 3D printer that weighs only 10 lbs and fits nicely on your desk Please note! the Printrbot is a kit and not for beginners! You'll get all the parts to assemble your own 3D printer but it does require some technical expertise, time and effort to assemble.

產品圖片：

本產品為原裝進口產品，由于產品涉及國際運費、增值稅和進口關稅款造成成本較高，故本產品不參加促銷活動，請親們不要議價哦！需要直接拍下，多謝親的理解！

原裝進口 正品保證

自己DIY的3D打印機 樂趣無窮

As of October 17th, 2014 we are shipping the new version of the PrintrBot Simple Kit with the following features & upgrades:

• Auto-Leveling Z-Probe - works with software to calibrate Z axis height
• Aluminum Extruder (direct drive) - 1.75mm Ubis Hot End with 0.4mm nozzle
• GT2 aluminum 20 tooth dual flange belts
• GT2 belts on X and Y axis
• Printerbot Rev F Printerboard with micro-USB connection (cable included) and micro SD card slot for untethered printing
• Aluminum Z Axis coupler
• Auto Level sensor
• Improved rigidity
• Cleaner design with electronics underneath the printer
• Clearly labeled laser cut parts for easier assembly
• All 4 motors are large Nema 17 stepper motors
• New fan shroud design
• 4″x4″x4.5″ build
• 1/4″ acme
• .1mm resolution layer height
• 6061 aircraft aluminum - Metal print bed

TECHNICAL DETAILS

• Weight: 9.3 lbs
• Dimensions: 10" x 10" x 4"
• Build Volume: 4" x 4" x 4.5"
• Filament Type: PLA
• Hot End: UBis 1.75mm
• Print Resolution: 0.1mm
• Tip Size: 0.4mm
• Print Speed: 60-65mm/min
• Actual Footprint of Assembled Printrbot Simple: 8" x 14" x 11"
• Shipping Dimensions: 10" x 10" x 4"
• Shipping Weight: 8 lbs
• Power Requirements: 12V (6 amp) laptop power supply (included)
• For technical support with your Printrbot visit the Printrbot knowledge base, the Printrbot forums, contact Printrbot. For missing/replacement parts, warranty assistance visit the Printrbot support center.

有問有答

1.履帶底盤接線方式：http://www.makerspace.cn/thread-5401-1-1.html

2.Arduino驅動安裝失?。?解決的方法：http://www.makerspace.cn/thread-337-1-1.html

3.L298N雙H橋直流電機驅動板接四個電機如何接線？：http://www.makerspace.cn/forum.php?mod=viewthread&tid=3903

4.Arduino uno R3+雙H橋驅動板+紅外遙控小車編程問題 ：http://www.makerspace.cn/forum.php?mod=viewthread&tid=3119

5.采用現成零件 在家自制Arduino手機：http://www.makerspace.cn/forum.php?mod=viewthread&tid=3858

6.利用Xbee模塊實現兩個UNO控制器的通信：http://www.makerspace.cn/forum.php?mod=viewthread&tid=5284

7.雙H橋直流電機驅動板如何給arduino供電：http://www.makerspace.cn/forum.php?mod=viewthread&tid=4299

前沿科技

1.玩轉Arduino-編譯環境軟件：http://m.lifestyle201.com/article-430.html

2.Arduino IDE錯誤提示問題原因匯總：http://m.lifestyle201.com/article-231.html

3.基于Arduino控制的4WD全向移動月球車平臺：http://m.lifestyle201.com/article-96.html

4.淺析AS-4WD尋線避障輪式機器人---組裝與調試：http://m.lifestyle201.com/article-217.html

5.基于第三代鋁合金舵機支架制作百變機器人：http://m.lifestyle201.com/article-146.html

6.通用底盤，外加功能模塊，將來的智能家用機器人會是這樣子的么？http://m.lifestyle201.com/article- 570.html

教學視頻

1.玩轉輪式機器人A系列安裝課程第一節：http://v.youku.com/v_show/id_XNTU2NjY3MDI0.html? from=y1.7-2

2.AS-4WD超聲監測避障小車炫酷視頻：http://v.youku.com/v_show/id_XMTI3NTU1ODk1Mg==.html? from=y1.7-2

3.Ardino-4WD輪式機器人手勢識別操控功能演示： http://v.youku.com/v_show/id_XMzUyMTc4MDAw.html?from=y1.7-2

4.機器人調試助手無線操控AS-4WD輪式機器人： http://v.youku.com/v_show/id_XNTkxNjU0ODIw.html?from=y1.7-2

5.AS-6WD越野輪式機器人無線遙控功能演示： http://v.youku.com/v_show/id_XNTcwMzc4NDYw.html?from=y1.7-2

6.直流減速電機驅動實例：http://v.youku.com/v_show/id_XNjQ2MDY0MDg=.html?from=y1.7-2

技術博客

1.奧松“呆萌”機器人空降哈工大地鐵站，嗨翻全場，迷倒眾人~： http://weibo.com/p/1001603889827673202336

2.用Scratch+PicoBoard 自制《植物大戰僵尸》： http://weibo.com/p/1001603887382670789557

3.Arduino控制直流電機：http://blog.sina.com.cn/s/blog_5e4725590100d2oq.html

4.Arduino PWM：http://blog.sina.com.cn/s/blog_5e4725590100d1d7.html

5.Arduino與32路舵機控制器通信實例：http://blog.sina.com.cn/s/blog_5e4725590100e490.html

6.Arduino中hex文件的保存及應用：http://blog.sina.com.cn/s/blog_5e4725590101bjwv.html

7.基于Arduino折騰出來的發燒級玩具 ：http://blog.sina.com.cn/s/blog_5e4725590101bhhu.html

8.Arduino 控制舵機：http://blog.sina.com.cn/s/blog_5e4725590100d3sf.html

百度百科

1.Arduino百度百科（點擊名稱）

2.哈爾濱奧松機器人科技有限公司(點擊名稱)

3.“機器人爸爸”于欣龍（點擊名稱）

維基百科

CarDuino UNO R3（點擊名稱）

RB-01C025-雙H橋直流電機驅動板(點擊名稱)