(SKU:RB-05L007)LCD4884液晶搖桿擴展板

產品概述

最新推出的LCD4884 LCD Joystick Shield v2.0 LCD4884液晶屏擴展板是哈爾濱奧松機器人科技有限公司研發的一款黑白屏液晶擴展板。此擴展板采用Nokia 5110液晶屏為顯示器件。SPI接口，最大限度的節省I/O資源。特別添加五向搖桿，方便實現搭建人機互動接口，剩余的模擬與數字接口全部用插針引出，便于安裝其它傳感器與模塊。本品適用于各種開發板和控制器，例如：Arduino控制器、STC單片機、AVR單片機等。

規格參數

產品名稱：LCD4884液晶搖桿擴展板
產品貨號：RB-05L007
工作電壓：DC5V
產品類型：Arduino擴展板
制作工藝：FR4雙面噴錫
人性化設計：具有可人機互動接口“五項搖桿”
工作溫度：10℃-30℃
重量：28g
產品尺寸：69.47mm x 53.34mm x 18mm
發貨清單：LCD4884液晶搖桿擴展板×1
包裝方式：靜電袋密封
選配配件：3PIN傳感器連接線、Arduino 328控制器等
板載資源：

數字接口：8個
模擬輸入借口：5個
48×84液晶：1個
無向搖桿按鍵：1個
系統復位按鍵：1個

使用方法

使用硬件

Carduino UNO 控制器 * 1個
LCD4884 Joystick Shield ×1
USB數據通信線×1

例子程序

程序上傳前需要先下載鏈接：https://pan.baidu.com/s/1rZRC6a2eQGpZs_oCbAPEuw?pwd=n7yp 提取碼：n7yp LCD4884 程序使用到的庫文件，將它放到Arduino安裝目錄下的libraries文件夾下

/* YourDuinoStarter Example: LCD SHIELD with 'Joystick' button
 - WHAT IT DOES Displays on LCD4884, reads button
 - SEE the comments after "//" on each line below
 - CONNECTIONS:
   - LCD 4884 Shield has all connections
   -
   NOTE: Start Serial Monitor to see switch voltage values
 - V1.00 02/08/2016
   Questions: terry@yourduino.com */

/*-----( Import needed libraries )-----*/
#include <LCD4884.h>  // UPDATED version 2/16 Yourduino
/*-----( Declare Constants and Pin Numbers )-----*/
#define LCD_BACKLIGHT_PIN  7

/*-----( Declare objects )-----*/
//None: Included in library
/*-----( Declare Variables )-----*/
int displayDelay = 1000;
int switchDelay  = 100;  // Switch scanning delay
int switchVoltage ;   // From Analog read of the button resistors

void setup()   /****** SETUP: RUNS ONCE ******/
{
  Serial.begin(115200);
  pinMode(LCD_BACKLIGHT_PIN, OUTPUT);
  lcd.LCD_init(); // creates instance of LCD
  lcd.LCD_clear(); // blanks the display
  for (int a = 0; a < 5; a++)
  {
    digitalWrite(LCD_BACKLIGHT_PIN, LOW);
    delay(300);
    digitalWrite(LCD_BACKLIGHT_PIN, HIGH);
    delay(300);
  }
  for (int a = 0; a < 6; a++)
  {
    lcd.LCD_write_string(0, a, "01234567980123", MENU_NORMAL); // ignore MENU_NORMAL for now
    delay(displayDelay);
  }
  delay(displayDelay);
  lcd.LCD_clear();   // blanks the display
  delay(500);
  // Show the BIG characters (0..9, + - only)
  lcd.LCD_write_string_big(0, 0, "012345", MENU_NORMAL);
  lcd.LCD_write_string_big(0, 3, "-+-+-+", MENU_NORMAL);
  delay(1000);
  lcd.LCD_clear();  // now  read the joystick using analogRead(0

}//--(end setup )---


void loop()   /****** LOOP: RUNS CONSTANTLY ******/
{
  lcd.LCD_write_string(1, 1, "PUSH A BUTTON", MENU_NORMAL);
  switchVoltage = analogRead(0);
  Serial.print("Switch analog value = ");
  Serial.println(switchDelay);

  if (switchVoltage == 0)
  {
    lcd.LCD_write_string(2, 2, "LEFT ", MENU_NORMAL);
  }
  else if (switchVoltage > 0 && switchVoltage < 180)
  {
    lcd.LCD_write_string(2, 2, "PUSH IN", MENU_NORMAL);
    delay(switchDelay);
  }
  else if (switchVoltage > 180 && switchVoltage < 400)
  {
    lcd.LCD_write_string(2, 2, "DOWN ", MENU_NORMAL);
    delay(switchDelay);
  }
  else if (switchVoltage > 400 && switchVoltage < 600)
  {
    lcd.LCD_write_string(2, 2, "RIGHT", MENU_NORMAL);
    delay(switchDelay);
  }
  else if (switchVoltage > 600 && switchVoltage < 800)
  {
    lcd.LCD_write_string(2, 2, "UP   ", MENU_NORMAL);
    delay(switchDelay);
  }
  else if (switchVoltage > 800)              {
    lcd.LCD_write_string(2, 2, "NONE    ", MENU_NORMAL);
    delay(switchDelay);
  }

}  //--(end main loop )---

/*-----( Declare User-written Functions )-----*/
//NONE

//*********( THE END )***********